![]() ![]() All thats required to operate the cutter is a simple kicking motion on the green cross bar while using the handles to push and direct the cutters path. So what's the project with the sod exactly? I had put steps all around the back deck so I used some patio blocks to set the steps on and they ended up being a couple inches higher then the lawn.That was done last summer,so in the winter it was a pain to watch out for the blocks as they were higher then the lawn when snowblowing,same as when cutting grass it was a pain to cut so I needed to riase the lawn to the same height as the blocks.I didn't want to just add soil and re seed so decided it would be better to cut out the sod and raise it up.This way mud dirt etc: isn't going to get tracked into the house.Larry. Manual Sod Cutter Manufacturer: Quail Manufacturing. Well Larry, you banged it together to work danged perfect! You do some good engineering. ![]() Needed to raise the lawn by the back entrance so rather then rent a sod cutter for a half dayminimum I made one out of some discarded lawn mower blades and deck wheels.I didn't want to have to build a frame so I just mounted it onto the 3 pth forks that I use on either the MF 1655 or the MF Gc2300.I used the MF 2300 for this job but could have used the MF 1655.Anyway it worked pretty good and did the job that I needed it too do. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |